Click the picture to view the original image
SD ZRSUNS 50W CO2 Laser Tube Power Supply special designed for 40W - 50W CO2 Laser Tube and mini laser engraver, laser stamp engraving machine, very small volume and weight, very long warranty and lifetime.
Product Specifications
| Laser Power Supply ZR-40W | |||
|
Input |
Input voltage | AC220V±10%(AC110V specified while order) | |
| AC Frequency | 47-440HZ | ||
|
Output |
Max Output Voltage | DC25KV | |
| Max Output Current | DC23mA | ||
| Efficiency | ≥90%(Full Load) | ||
| Response Speed | ≤1ms | ||
| Insulation Resistance | ≥50MΩ(DC500V) | ||
| Cooling Methods | Forced air cooling(fan cooling) | ||
|
Environmental Requested |
Working Temperature | -10~50ºC | |
| Storage of temperature | -20~75ºC | ||
| Relative Humidity | Max 85%RH (non-condensing) | ||
|
Altitude |
100000 feet of work,200000 feet of storage,does not work. | ||
Product Details
Good compatibility:
It can be applicable to 30W, 40W, 50W laser tube.
Fast response speed and effect.
Dramatically lengthen the life of laser.
Control is simple:
Select high or low level control, the use of TTL-level control of the laser can start and stop.
At the same time increase the protection switch, testing is through the external water and ventilation.
Protection Function:
Power supply itself has open circuit protection, a good grounding in the case of protection,
the power supply to short-term work in the open state, so to avoid the laser tube burst due to the damage caused by laser power supply,
thereby enhancing the laser power supply of life.
Order and delivery
