Click the picture to view the original image
Photostability Test Chamber XCH-500LTPS
This Photostability Test Chamber is a advanced temperature controlled stability chambers for precise temperature control. ICH Approved. XCH stability test chamber can be equipped with near-ultraviolet lamps, meeting the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoei. And widely used for research on the pharmaceutical industry,Medical industry,Biotechnology industry and other life science-related industries.
Key Features:
• Temperature Control: Temperature Fluctuation ≤ ±1.0℃，Temperature Deviation ≤ ±2.0℃（Same layer）
• Illumination Control: The total illumination is not less than 1.2×106 Lux·hr，Near ultraviolet energy is not less than 200w·hr/m2
• Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation
• Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance
• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate
• Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.
• Control System: The imported digital display illuminance controller,High control accuracy.
• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.
• Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply
• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard
• Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition
• Installed Power: AC220V±10% 50HZ
• Environment temperature: +5~35℃
• SMS alarm: Optional.
Stability chamber specification:
|
MODEL |
TEMP RANGE |
CAPACITY(L) |
INTERNAL DIMEN(mm) W×D×H |
EXTERNAL DIMEN(mm) W×D×H |
POWER(KW) |
TRAY |
SystemIllumination range |
Remarks |
|
XCH-150TPS |
15～50℃ |
150 |
650×490×500 |
800×790×1250 |
1.0 |
1 |
Visible light: 100 ～ 8000Lux Near UV: 0.84 ～ 5w/m2 |
1*independent light source system
1*printing storage system
|
|
XCH-250TPS |
15～50℃ |
250 |
600×500×830 |
760×870×1650 |
1.5 |
2 |
2*independent light source system
2*printing storage system
|
|
|
XCH-500TPS |
15～50℃ |
500 |
680×680×1070 |
840×1050×1850 |
2.2 |
3 |
3*independent light source system
Print and store 3 layers of data
|
|
|
XCH-250LTPS |
2～30℃ |
250 |
600×500×830 |
760×870×1650 |
1.5 |
1 |
Visible light:
100 ～ 5000Lux
Near UV:
0.84 ～ 1w/m
|
1*independent light source system
1*printing storage system
|
|
XCH-500LTPS |
2～30℃ |
500 |
680×680×1070 |
840×1050×1850 |
2.2 |
2 |
2*independent light source system
Print and store 2 layers of data
|
Advantages:
No maintenance.No pollution source
High sensitivity, low annual drift
High precision
Safety,with alarm system
