Click the picture to view the original image
Vibrating Feeder, Feeding Machine,Feeder
The type of Vibrating Feeder (Vibratory feeder) is used to transfer the large size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. The vibrating feeder is widely used to match the crushing and sieving equipments in many industries including metallurgy, coal mine, mineral dressing, building material, chemical, grinding, etc.
Features
1.ZSW vibrating feeder applys to the processing capacity below 500 t/h and it is one of the main products of our company.
2.Rather than grease lubrication, our ZSW vibrating feeder is lubricated by thin oil which can make the bearings get sufficient lubrication and reduce the temperature of bearings, in result, prolong the service life of the equipment. In addition, by using thin oil lubrication, the frequency of oil injection will be reduced and then improve work efficiency.
3.The base plate and side protection board are bolted to shell and can be exchanged easily. It makes the maintenance more convenient and reduces the operation cost.
4.This type of feeder can equip with sieve bars and the width of sieve bars can be designed according to customers’ requirements to reach the pre-screening effect.
5.There is cross beam under the base plate. It makes the feeder machine more sturdy and prolong its service life.
6.The buffer spring under the motor base can reduce the impact generated by the start-up of the motor.
7.Double eccentric shaft vibration exciter is the source of vibration which provides a better screening and feeding effect.
8.The eccentric shaft can adjust the angle by gear to change the feeding speed.
9.The pulley and the shaft employ expansion sleeve connection which makes assembly and disassembly convenient and save maintenance time.
Smooth vibration, reliable operation, long service life, low noise, low power consumption, easy to adjust, simple structure, easy
Vibrating Feeder is a kind of linear direction feeding equipment. The Vibrating Feeder of SDSY features smooth vibrating, reliable operation, long service life and being suitable for feeding. The feeders are widely used in mining, building-material, silicate and chemical industry in the crushing and screening plants.
In the Sand-Stone production line,The feeder machine can send materials to crusher evenly and continuously, at the same time, it can screen materials roughly. The feeder machine can be used in these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.
Safety Technology of Vibrating Feeder
1. Regular maintenance and examine are the main methods to prolong the using life and guarantee the normal work of the vibrating feeder, customers should pay special attention to it. For lubricating oil, the following issues deserve more attention:
(1) Thin oil splash lubrication are adopted in the vibrating feeder,the location and climate decide the choice of lubricating oil, the gear oil are generally adopted;
(2) Ensure the thin oil in the vibration exciter of vibrating feeder is above the oil level indicator (infuse through joint bending pipe); replace oil every 3-6 months, before infusing fresh oil, wash surface of the vibrating feeder oil tank, bearing rolling path and gear wheels by clean gasoline or kerosene;
2. Safety technology
(1) The machine operators should take safety technology education while running the vibrating feeder;
(2) During operation, strictly prohibit standing near vibrating feeder, touch machine by hand, adjusting, cleaning or repairing;
Models and Specifications:
|
Model |
Feed Size(mm) |
Capacity(t/h) |
Grove Face of Inclination(°) |
Motor Power(KW) |
Oversize(mm) |
|
ZSW380-96 |
≤500 |
70-140 |
0 |
11 |
3882×1467×1325 |
|
ZSW490-110 |
≤600 |
120-250 |
0 |
15 |
4980×1654×1345 |
|
ZSW490-120 |
≤700 |
150-300 |
0 |
18.5 |
4980×1754×1345 |
|
ZSW590-120 |
≤700 |
180-350 |
0 |
22 |
6058×1925×1563 |
|
ZSW590-130 |
≤750 |
250-450 |
0 |
30 |
6058×2025×1563 |
Why customers choose our products?
1.In fact we are not in selling products, and more to help the customer to make a choice
2.We have good after-sales service(Erection and Commissioning,Operator Training,Spare Parts Supply)
3.We have Pre-defined Query Future:Our products will be cheaper,energy-saving, simple structure,etc.
When you are interested in Shandong Chengming Jaw Crusher, please Check "QA" to save time
Q: What about Warranty? What will we do if the machine is broken down?
A: Our Warranty is 1 year for whole machine except wearing spare parts.
We will provide the technical advice and find the solution immdiately for you when the machine is in trouble-shoot. For wearing spare parts, we gurantee the high quality parts for long-time supply.
Q: What's information should we offer for you if we want to get best engineering proposal and quotation?
A: If you want us recommend a suitable engineering proposal for you, please let us know the following information,
1. You only need one Jaw Crusher of whole crushing line? (Include feeder, crusher,
screen, belt coveyor and so on).
2). What is the stone type? Marble, granite, basalt, gravel or others?
3). What is the capacity you need? Tons per hour
4). What is the Max Input Size? mm/inch
5). What is the Out Put Size you need ? 0-5-10-15mm or other size?
6). What is the use of the final products?
Q: What could you help me to do for the business?
A: Thank you for your trust, we can provide you with pre-services of design scheme
for complete production lines, spot inspection and operator training according to your demands and the conditions and of applied spot, we can help you choose the matching equipments, drilling rig, loader, trucks, excavators and so on.
When you check all, please contact us by e-mail or call us, we will make the business simple for you.
